A car radio connection is something that you will find is not going to be any good if you do not have it wired properly. You are going to need the best sound possible, and the best way to do this is to make sure that the car stereo wires are properly hooked up and installed. You will find that there are a lot of tips that you can learn from to make sure that your vehicle has the best possible sound coming from its speakers. It is important that you are able to understand speaker gauges and what each size and type means. If you have a good understanding about them, then the better you will be able to get your car radio to sound once it has been connected.
There are several things you will be able to do to make sure that your car radio is installed quickly and correctly. You will need to make sure safety is first practiced. You should never install the audio system whenever you have the electricity going. The more room that you have to work, the faster you will go, so remove the dashboard before you begin. It is usually a good idea for you to make sure you know where everything goes beforehand so hooking everything back up will be easier. Write it all down or take a picture.
It is important not to get ahead of yourself whenever you begin to take off the wires; do them one by one. Make sure that you have the instruction manual nearby and you have already read over it thoroughly. Remember to keep the audio system unsecured and loosened after you have finished hooking everything up. You will need to make sure that it is all working before you tighten anything. Turn the battery back on, make sure the sound is to your liking and then tighten everything up.
The wiring is the most important part of the installation process for your car stereo. You will need to make sure you understand the different types of wiring and what they mean. The most common sizes that you will find for wires are 3/0, 2, 4, 1/0 and 8 gauge. You will be able to find them in negative or positive, never in both. If you happen to have subwoofers, then a dual conductor that has both negative and positive will come in 10, 12, 14, 16, 18 as well as 22 gauges.
Remember that whenever you are trying to decide the gauge wire, it is always better to round up than down. A good example to go by to help determine what you need, is if you have a 1200 watt amplifier that happens to be rated at 100 amps, while 18 feet are being used from the amp to the battery, then 1/0 gauge will be your best bet.