• Auto Rustproofing Made Easy

    Depending on the conditions in which a car is stored and the manner in which it is used, some method of auto rustproofing will be necessary to keep the bodywork in good condition. There are a variety of methods that can be utilized for the task and it is worthwhile understanding each to help you decide which is best for you.   


    Prior to undertaking any auto rustproofing, it is important to examine the entire surface to get an idea of the severity of the rust problem. This will enable you to determine the course of action required to rectify the problem according to whether it is minor or advanced. You may find rust that affects hidden areas, such as the wheel arch, will be worse than on exposed areas which are regularly maintained.    


    Whether or not rust has already affected the surface of the vehicle, it is necessary to begin the process of auto rustproofing by cleaning it. In the event that the surface remains intact and rust free, you must clean it so there is no debris, dust or grease on the surface. This will ensure the application of the auto rust proofing substance can be made properly. Where rust has already developed, you will need to take steps to remove any loose particles. This can be undertaken with a wire brush or sandpaper depending on the extent of the problem.   


    Where only a basic auto rustproofing method is required because the problem can be classed as minor, this can be undertaken with rust encapsulator. This substance is one that makes use of flakes of glass in order to seal the surface to prevent the corrosion from spreading or returning. It can be applied with a paintbrush or by spraying it on. It is suitable for all types of surface but especially so for plastic body fillers. When a base coat is necessary as part of the auto rustproofing process, Self Etching Primer should be used, which is made up of acid and zinc to help it to adhere to a wide variety of metal surfaces.       


    Where the rust problem is large or advanced, a more extensive amount of protection is required, which will involve an undercoating. Using a heavy-duty anti-rust primer or rubberized undercoat will provide an additional layer of protection for the metal beneath. Although these may not always create a surface that paint will easily adhere to, this can be rectified by applying a layer of encapsulator.  


    Prevent the need for rustproofing by utilizing steps that will protect your car’s paintwork. There are several environmental factors that are responsible for rust forming and the easiest way to protect against this is by covering your vehicle. Use a car cover to protect the paintwork from UV rays and pollution. Make sure you clean and wax your car as part of the regular maintenance, as this will also protect the paintwork.